STAS
bioSTAR ALU
The semi-trailer for wood chips with a moving floor is designed to transport products such as paper, wood, wood chips, fertilizers, agricultural products, etc.
MAIN SETTINGS
MAIN SETTINGS
Semi-trailer type
Moving
floor
72 - 104 m3
Cubature
Aluminum
Aluminum
Body
Chassis

POSSIBLE TO TRANSPORT
Paper
Biomass
Wood
Big Run
Slivers
Fertilizers
Agricultural products
Left
Right

FEATURES OF CHIPS

Walking floor with 15 planks

The key distinguishing feature of this semi-trailer model is considered to be a strong and resistant to increased mechanical stress floor, which consists of 15 parallel strips. The traverses are at the same distance from each other and are made of steel alloy, which for a long time does not undergo deformation.
Подвижный пол с 15 планками
XHDI execution
The profile aluminum strips, which are laid parallel to each other, are reinforced with XHDI (X-treme Heavy Duty Impact) construction. This material is specially designed for the transportation of highly abrasive products and has a high impact resistance. The system is characterized by a low specific gravity.
XHDI execution
The profile aluminum strips, which are laid parallel to each other, are reinforced with XHDI (X-treme Heavy Duty Impact) construction. This material is specially designed for the transportation of highly abrasive products and has a high impact resistance. The system is characterized by a low specific gravity.
Stainless steel reinforcement
Designed to improve performance and performance
hardened with stainless steel alloy parts that protect the seats the joint and connection of the planks to the floor from the adverse effects of external factors.

This alloy is specially used on those vehicles that
are subjected to numerous loading and unloading operations.
Forklift reinforcements at wheel level
Forklift reinforcement at wheel level shown in parallel
located plates, which are located on the side wall of the container. As The raw material is aluminum alloy. Plates are located perpendicular to the frame elements, thereby reducing the load on the structure.
Attached to the base by welding.
Aluminum side wall reinforced with a compensating plate
The side wall is made of aluminum sheet, which is attached to the base of the frame, reinforced with a compensating plate. The surface of this sheet is smooth and glossy, without roughness, which eliminates the risk of damage to the goods. The use of this material is due to the increased resistance to mechanical stress and damage.
Aluminum side wall reinforced with a compensating plate
The side wall is made of aluminum sheet, which is attached to the base of the frame, reinforced with a compensating plate. The surface of this sheet is smooth and glossy, without roughness, which eliminates the risk of damage to the goods. The use of this material is due to the increased resistance to mechanical stress and damage.
Floor tarpaulin with pneumatic control
The floor covering is made of heavy duty tarpaulin that can withstand the high pressure generated by the material being transported. The pneumatic control of this structural element is characterized by smooth movement and the ability to consistently unload the goods without violating the integrity of the container structure.
Anti-lifting blocks
Anti-lifting blocks are special structural elements that perform a protective function and prevent the sudden lifting of materials, which can lead to a traffic accident. The fixation of these parts is carried out by means of resistance welding and fasteners that hold them in the desired position and open them if necessary.
Overquick closing system
The special Overquick closing mechanism allows for a reliable and fast closing of the back wall of the container after loading / loading materials.

The procedure is carried out in manual mode, if necessary, the volume of the container can be changed (within the established limits) by changing the fixation marks on the outside of the dump truck.
Overquick closing system
The special Overquick closing mechanism allows for a reliable and fast closing of the back wall of the container after loading / loading materials.

The procedure is carried out in manual mode, if necessary, the volume of the container can be changed (within the established limits) by changing the fixation marks on the outside of the dump truck.
Reinforced tarpaulin
Reinforced tarpaulin is made of heavy-duty material that is able to withstand increased loads, exposure to adverse environmental factors, and also restrain products that will be transported by a dump truck. For fastening the tarpaulin, special steel elements are used and fasteners to keep it twisted.
EXECUTION OPTIONS

 

Still have questions?
Fill
the form
Enter your contact details in the form below
Kiev, 02081, st. Zdolbunovskaya, HOUSE. 7-D, building "Z"
ABOUT COMPANY
CONTACTS
  • (044) 333-43-32
  • (073) 788-99-88
  • sales@stas.ltd
  • Kiev, 02081, st. Zdolbunovskaya, bud. 7-D, building "Z"
Made on
Tilda